Regular Maintenance Schedule for Parsun Outboards
Daily checks before use
Before you head out on the water, it's essential to perform a few quick checks to ensure your Parsun engine is in good working order.
Here are some daily checks you should make part of your pre-launch routine:
Checking the engine oil level- Put the outboard motor in an upright position (not tilted).
- Check the oil level using the dipstick to be sure the level falls between the upper and lower marks.
- Fill with oil if it is below the lower mark, or drain to the specified level if it is above the upper mark.
- CAUTION: Be sure to completely insert the dipstick into the dipstick guide.
Fuel- Check to be sure you have plenty of fuel for your trip.
- Make sure there are no fuel leaks or gasoline fumes.
- Check fuel line connections to be sure they are tight.
- Be sure the fuel tank is positioned on a secure, flat surface, and that the fuel line is not twisted or flattened, or likely to contact sharp objects.
Controls
- Check throttle, shift and steering for proper operation before starting the engine.
- The controls should work smoothly, without binding or unusual free play.
- Look for loose or damaged connections.
- Check operation of the starter and stop switches when the outboard motor is in the water.
CAUTION
- Do not start the engine out of water. Overheating and serious engine damage can occur.
- Check the engine and engine mounting.
- Look for loose or damaged fasteners.
- Check the propeller for damage.
NOTE
- When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after every use.
This will help prevent salt, sand, and other debris from building up in the cooling system and causing damage.
Annual service requirements
- Check to be sure you have plenty of fuel for your trip.
- Make sure there are no fuel leaks or gasoline fumes.
- Check fuel line connections to be sure they are tight.
- Be sure the fuel tank is positioned on a secure, flat surface, and that the fuel line is not twisted or flattened, or likely to contact sharp objects.
Controls
- Check throttle, shift and steering for proper operation before starting the engine.
- The controls should work smoothly, without binding or unusual free play.
- Look for loose or damaged connections.
- Check operation of the starter and stop switches when the outboard motor is in the water.
CAUTION
- Do not start the engine out of water. Overheating and serious engine damage can occur.
- Check the engine and engine mounting.
- Look for loose or damaged fasteners.
- Check the propeller for damage.
NOTE
- When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after every use.
This will help prevent salt, sand, and other debris from building up in the cooling system and causing damage.
Annual service requirements
Once a year, it's a good idea to give your Parsun engine a thorough inspection and service to keep it in top condition.
Here are some annual service requirements to consider:
- Fuel filter: Check/cleaning/replacement
- Fuel system: Check
- Fuel tank: Check/cleaning
- Gear oil: Change
- Greasing points: Greasing
- Idling speed (carburetor models): Check/adjustment
- Propeller and cotter pin: Check/replacement
- Shift link/shift cable: Check/adjustment
- Thermostat: Check
- Throttle link/throttle cable/ throttle pick-up timing: Check/adjustment
- Water pump: Check
- Engine oil: Replacement
- Oil filter: Change
- Spark plugs: Cleaning/adjustment/replacement
- Timing belt: Check/replacement
- Anode: Check/replacement
Annual service requirements for each model
For specific maintenance tasks for your Parsun outboard model, refer to the owner's manual or contact your local authorized Parsun dealer.
Here are some common models and the maintenance tasks they require:
- Parsun F2.6
- Parsun F4/F5
- Parsun F5A/F6A
- Parsun F8/F9.8
- Parsun F9.9/F15
- Parsun F15A/F20A
- Parsun F15A/F20A EFI
- Parsun F20/F25
- Parsun F30/F40
- Parsun F50/F60
Site presented by the Swedish company KM Gruppen AB.
We distribute Parsun 4-stroke outboards since 2006.
When ordering, spare parts are shipped from Sweden, often the same day.
If you need to contact us we communicate in English (or Swedish) please email us at info@parsun.se